Gas Fitter Waratah

Waratah Plumbing Co is the gas fitter Waratah households call for cooktops, ovens, heaters, gas hot water and bayonet outlets, with every line tested before we pack up. Each job is quoted fixed and up front, and (02) 4063 1093 reaches us day or night.

Call (02) 4063 1093 Request a quote

Licensed plumbers and gas fitters · NSW Lic. 359278C

Last updated September 2026

Available 24/7
No call-out fee (excluding after-hours)
Fixed, up-front quotes
365-day warranty on all work

Freestanding gas cooker connected in a kitchen

Which Gas Jobs Do Waratah Homes Ring For?

Gas jobs in this suburb tend to follow the age of the house:

Cooktop and oven connections in kitchens renovated around the original house
Gas heaters and bayonet points added to older brick and weatherboard lounges
Gas hot water, storage or continuous flow, sized to the household
Outdoor BBQ points on decks and in backyards
Leak testing and repair on old runs inherited with an older purchase

Gas is not a do-it-yourself category. It is licensed work, and the testing is the point of the licence.

Waratah Gas Fitting Services

Gas work here splits into two services:

Gas Appliance Installation

Cooktops, ovens, heaters and BBQs, run in, connected and commissioned:

Gas Leak Detection and Repair

Suspected leaks traced with gas detectors, found and fixed, the line tested afterwards:

How Do You Know the Line Is Safe?

Tested, not assumed

After any connection we make, the run is pressure-tested and swept with gas detectors before the appliance gets used.

Set up to spec

The unit is commissioned to the maker's instructions, and the paperwork goes to you, so a future sale, insurance check or another tradesman can see exactly what was done and when.

The record speaks for itself

If anything in our work is ever questioned down the track, the paperwork answers it, and the same number reaches us if a correction is needed.

How the Gas Quote Is Built

We provide up-front, honest quotes that will always match the final price, should you decide to go ahead.

On gas, the price starts with the distance from the meter:

The pipe run How far the gas has to travel from the meter, and how many walls it crosses to get there. A straight run along an outside wall costs less than one threaded through a century-old cottage frame.
The appliance A bayonet point, a cooktop and a continuous-flow unit are three different amounts of pipe, fitting and commissioning work.
The existing connection An old run that gets reused where it is sound, or replaced where it is not, changes the figure before work starts.
The hour Night and weekend gas work costs more, and you hear that rate when you book.

No dollar figures get invented on the phone. The number is named at the property, in writing, and nothing starts until you approve it.

Old Cottages, New Kitchens

Two housing vintages, two gas jobs

Detached houses make up 62.5 per cent of homes here at the last census, much of it brick and weatherboard from the suburb's colliery years. That older stock is where heaters and bayonets go into original lounges and cooktops into kitchens renovated around an old shell.

The routing is the job

A gas line through a cottage altered across a century of owners crosses walls that have moved, closed and reopened. The fitter traces the run before quoting, because the figure should reflect what the house actually allows. Newer infill is a smaller share of the stock, and its gas work is usually shorter runs in modern frames.

What Customers Say

We had an urgent gas problem that required immediate attention at our home…on a Friday afternoon. … Identified the issue, fixed and tested

Lee

What the Call Looks Like

1. Ring or send the form

Call (02) 4063 1093 or use the form to explain the fault. We ask enough to bring the right equipment the first time.

2. A fixed price first

A plumber inspects the job and names a fixed figure up front. Nothing gets started until you give the go-ahead.

3. The gas work itself

Pipework is run, the appliance connected, and the line tested with gas detectors before the job is signed off.

4. Covered for a year

Every job carries our 365-day warranty on all work. If something we did isn't right, ring the same number.

When We're Not the Right Call

A smell coming from the meter itself goes to the gas network's emergency service, not to us. An appliance that fails internally while under the maker's warranty often goes back to the manufacturer first, because the maker may refuse a claim once someone else has opened it up.

Gas Questions Locals Ask Us

Who can legally connect a gas cooktop?

In NSW, gas work is licensed trade work, so the connection is done by a plumber who is also a licensed gas fitter, and the line is tested before the stove is used. Our gas fitters connect the appliance, then leak-test every joint with gas detectors and hand over the compliance paperwork.

Do you install gas hot water systems?

We do. We fit both gas storage tanks and continuous-flow units, and the quote covers the unit, the pipe run and the commissioning in one price. Whether an old unit is worth repairing is covered on the hot water hub, which matters for the older detached stock here.

What gets checked on a gas job?

Every joint on the new run is tested with gas detectors, the unit is set up to the maker's spec, and you receive the paperwork for what was done. Anything that needs a follow-up goes in writing with the quote, not left as a verbal promise.

Is the gas work covered by warranty?

Yes. Every job carries our 365-day warranty on all work, gas fitting included, so if something we did isn't right within that year, you ring the same number and we come back to it.

Need a plumber? Call or send the form

Call (02) 4063 1093 or send the form below. Available 24/7, you see a fixed figure ahead of any work, and every job carries our 365-day warranty on all work.

Call (02) 4063 1093

Request a callback

Leave a name and number and a plumber will ring you back.